RESEARCH AND DESIGN THE CONTROL SYSTEM FOR 2 DIESEL GENERATORS APPLIED IN THE FACTORY

Nguyễn Quang Nhã

doi:10.34238/tnu-jst.8101

RESEARCH AND DESIGN THE CONTROL SYSTEM FOR 2 DIESEL GENERATORS APPLIED IN THE FACTORY

About this article

Received: 09/06/23 Revised: 13/07/23 Published: 13/07/23

Authors

Nguyen Quang Nha , University of Engineering and Technology - Vietnam National University, Hanoi

Abstract

With the development of industrialization and modernization, the role of the power supply system has become increasingly important. Researching and developing automatic transfer switch systems from the main power source to alternative backup sources to ensure stability is crucial. Nowadays, data centers, hospitals, and manufacturing plants require high levels of electrical safety and stability, with a zero tolerance for power outages. This paper presents the research results of designing a control system for two DIESEL generators applied in a factory. The control panel system has been constructed and practically tested, and its operating modes operate stably and accurately according to the specified algorithm flowchart. The system can amplify power to ensure compatibility with high-capacity systems, making it suitable for places with high requirements for electrical stability, especially in factory applications.

Keywords

ATS (Automatic Transfer Switch); Generator; UPS; PLC; HMI

Full Text:

PDF (Tiếng Việt)

References

[1] A. U. Adoghe and I. A. Odigwe, “Automatic Transfer and Controller System for Standby Power Generator,” Adv. Mater. Res., vol. 62–64, pp. 187–193, Feb. 2009, doi: 10.4028/www.scientific.net/ AMR.62-64.187.

[2] J. O. Olowoleni, A. U. Adoghe, A. Ademola, A. O. Omadoye, A. F. Agbetuyi, H. E. Orovwode, and C. O. Awosope, “Construction and Operation of an Electronic Automatic Transfer Switch (Ats),” Glob. J. Energy Technol. Res. Updat., vol. 2, no. 1, pp. 01–05, Mar. 2015, doi: 10.15377/2409-5818.2014.02. 01.1.

[3] M. Q. Azeem, Habib-ur-Rehman, S. Ahmed, and A. Khattak, “Design and analysis of switching in automatic transfer switch for load transfer,” in 2016 International Conference on Open Source Systems & Technologies (ICOSST), Lahore, Pakistan: IEEE, Dec. 2016, pp. 129–134, doi: 10.1109/ ICOSST.2016.7838589.

[4] W. Audia, Mairizwan, R. Anshari, and Yulkifli, “Automatic Transfer Switch Solar Cell Inverter System Based on Android Application,” J. Phys. Conf. Ser., vol. 2309, no. 1, Jul. 2022, Art. no. 012026, doi: 10.1088/1742-6596/2309/1/012026.

[5] J. S. Saputro, H. Maghfiroh, F. Adriyanto, M. R. Darmawan, M. H. Ibrahim, and S. Pramono, “Energy Monitoring and Control of Automatic Transfer Switch between Grid and Solar Panel for Home System,” Int. J. Robot. Control Syst., vol. 3, no. 1, pp. 59–73, Jan. 2023, doi: 10.31763/ijrcs.v3i1.843.

[6] S. Basoene, D. C. Idoniboyeobu, and S. L. Braide, "Design and Implementation of a Three Phase Automatic Transfer Switch Using Relays as Phase Failure Protection," International Journal of Innovative Scientific & Engineering, vol. 10, no. 2, pp. 55-71, Apr. - Jun. 2022.

[7] A. Tafrikhatin, J. Sumarah, A. T. Wulandari, U. Pambudi, and I. G. Allam, “Simple Automatic Transfer Switch System Using Timer Delay Relay,” Journal of Electrical Technology, vol. 6, no. 2, pp. 303–309, Dec. 2022, doi: 10.37339/e-komtek.v6i2.1076.

[8] J. G. Noel, “Design of an 10 kVA-45 A automatic static transfer switch module,” in 7th IET International Conference on Power Electronics, Machines and Drives (PEMD 2014), Manchester, UK: Institution of Engineering and Technology, 2014, pp. 0437–0437, doi: 10.1049/cp.2014.0468.

[9] A. Jadhav and M. Patil, “PLC Based Industrial Automation System,” in International Conference on
Recent Trends in Engineering and Management Science (RTEM 2014), Nagpur, 2014, pp.19-23.

[10] R. Pawar and N. R. Bhasme, “Application of PLC’s for Automation of Processes in Industries,” Int.
Journal of Engineering Research and Applications, vol. 6, no. 6, (Part - 3), pp. 53-59, June 2016.

[11] Y. N. Burali, “PLC Based Industrial Crane Automation & Monitoring,” International Journal of
Engineering and Science, vol. 1, no. 3, pp. 01-04, Sept. 2012.

DOI: https://doi.org/10.34238/tnu-jst.8101

Refbacks

There are currently no refbacks.



Remember me