Email this article STUDY TO BUILD AN AUTOMATIC MEASUREMENT AND WARNING SYSTEM OF ALCOHOL CONCENTRATION FOR VEHICLE DRIVERS
About this article
Received: 08/10/20 Revised: 30/11/20 Published: 30/11/20Authors
1. Ho Mau Viet
, TNU - University of Information and Communication Technology2. Le Hoang Hiep, TNU - University of Information and Communication Technology
3. Mac Thi Phuong, TNU - University of Information and Communication Technology
4. Dao Thi Hang, TNU - University of Information and Communication Technology
Abstract
This paper focuses on researching and designing an alcohol concentration monitoring system for vehicles on road traffic with functions such as: displaying measurement results directly on the LCD screen, sending data to the machine personal calculation, send measurement results to SmatPhone. The performance of the system is assessed through four cases: measuring alcohol at levels 1, 2, 3 compared to the standard and case 4 comparing the research equipment with the device has already used on the market. The system can measure alcohol when the driver in traffic passes the traffic checkpoint. The data is reported, sent directly to the driver's personal phone and sent to the remote control center via the Internet. The experimental results show that the error of the system compared to the U-Kiss alcohol concentration meter is 3.04 (%); with this result, the system completely meets the requirements set forth. The system, when applied in practice, will help reduce traffic accidents caused by drivers exceeding alcohol content when participating in road traffic.
Keywords
Full Text:
PDF (Tiếng Việt)References
[1]. M. S. Murugan, L. Srikanth, and V. P. S. Naidu, "Design and development of LabVIEW based environmental test chamber controller," International Conference on Electrical, Electronics, Communication, Computer, and Optimization Techniques (ICEECCOT), Mysuru, 2017, pp. 1-4, doi: 10.1109/ICEECCOT.2017.8284638.
[2]. M. Odema, I. Adly, and H. A. Ghali, "LabVIEW-Based Interactive Remote Experimentation Implementation using NI myRIO," International Conference on Innovative Trends in Computer Engineering (ITCE), Aswan, Egypt, 2019, pp. 214-218, doi: 10.1109/ITCE.2019.8646602.
[3]. H. M. Viet, and L. H. Hiep, “Designing a surveillance, measurement and control system for supplying livestock and farm LabVIEW platform-based,” TNU Journal of Science and Technology, vol. 225, no. 06, pp. 258-264, 2020.
[4]. S. Uzairue et al., “IoT-Enabled Alcohol Detection System for Road Transportation Safety in Smart City,” in Computational Science and Its Applications – ICCSA 2018, Springer international Publishing, 2018, pp. 694-705, doi: 10.1007/978-3-319-95171-3_55.
[5]. J. D. Lee et al., Assessing the feasibility of vehicle-based sensors to detect alcohol impairment, National Highway Traffic Safety Administration, Washington DC, 2010.
[6]. N. James, and T. P. John, “Alcohol detection system,” International Journal of Research in Computer and Communication Technology, vol. 3, no. 1, pp. 059-064, 2014.
Refbacks
- There are currently no refbacks.