INFLUENCE OF ACRYLIC/ MELAMINE RATIO ON SOME PROPERTIES OF ACRYLIC- MELAMINE COATING | Thành | TNU Journal of Science and Technology

INFLUENCE OF ACRYLIC/ MELAMINE RATIO ON SOME PROPERTIES OF ACRYLIC- MELAMINE COATING

About this article

Received: 19/07/21                Revised: 23/11/21                Published: 24/11/21

Authors

Nguyen Trung Thanh Email to author, Institute of Technology, General Department of Defense Industry

Abstract


This article introduces effects of acrylic/melamine ratio on mechanical properties, chemical stability, thermal resistance,… of baking acrylic- melamine varnish. Infrared spectroscopy (FT-IR), Thermal gravimetric analysis (TGA), FESEM,... were used to examine the investigation’s results. Through testing mechanical properties and through- drying temprature of coating, acrylic / melamine ratio is 35/15 and drying temperature of 140oC, in 60 minutes are determined. Infrared spectroscopy (IR) shows curing reaction between acrylic and melamine resin. In addition, article also introduces testing results in lubricant, HCl acid 5%, A95 gasoline for 240 hours and thermal stability of acrylic- melamine varnish. Results of TGA have shown that thermal decomposition of varnish coatings depend on ratios of acrylic/melamine resin. Acrylic- melamine coating is capable of being used to protect metal parts in some chemical conditions and the coating can be used for cars’ fuel tank or motors’ fuel tank,...

Keywords


Acrylic- melamine varnish; Acrylic- melamine paint; Acrylic- melamine coating; Chemical resistance; Heat resistance

Full Text:

PDF

References


[1] C. D. Kelly, Atomotive Paint Techology into the 21st century, International Specialised Skills Institute, Melbourne, 2009.

[2] J. J. Licari, Coating materials for electronic applications, William andrew publishing norwich, New York, 2009.

[3] G. Nishino, S. Kanda, H. Sugimoto, K. Inomata, and E. Nakanishi, “Preparation and coating properties of an acrylic melamine resin containing silicone segments,” Polymer Bulletin, vol. 68, pp. 2049- 2060, 2012.

[4] M. C. Suzana and L. B. Boskovic, “FTIR Analysis and The effects of alkyd/melamin resin ratio on the properties of the coatings,” Hemijska Industrija, vol. 63, no. 6, pp. 637-643, 2009.

[5] M. C. Jovii, R. Radievi, and J. K. Budinski-Simendi, “Curing of alkyd based on semi-drying oils with melamine resin,” Journal of Thermal Analysis and Calorimetry, vol. 94, no. 1, pp. 143-150, 2008.

[6] R. Jack, A. U. Anya, and O. F. Osagie, “Comparative Studies of Oil-Modified Alkyd Resins Synthesized from Epoxidized and Crude Neem Oil,” American Journal of Applied Chemistry, vol. 4, no. 4, pp. 120-124, 2016.

[7] M. A. Malek, T. Nakazawa, H.-W. Kang, K. Tsuji, and C.-U. Ro, “Multi-Modal Compositional Analysis of Layered Paint Chips of Automobiles by the Combined Application of ATR-FTIR Imaging, Raman Microspectrometry, and SEM/EDX,” Molecules, vol. 24 no. 7, p. 1381, 2019.

[8] E. Shirmin, L. Imo, S. M. Ashraf, and S. Ahmad, “Acrylic-melamine modified DGEBA-epoxy coatings and their anticorrosive behavior,” Progress In Organic Coatings, vol. 50, no. 1, pp. 47-54, 2004.

[9] Z. Bahreini, V. Heydari, and Z. Namdari, “Effects of nano-layered silicates on mechanical and chemical properties of acrylic-melamine automotive clear coat,” Pigment & Resin Technology, vol. 46, no. 2, pp. 333-341, 2017.

[10] R. Han and Y. Zhang, “Studies on Performance of Cured Water-Borne Melamine–Acrylic Emulsion Coatings,” Journal of Adhesion Science and Technology, vol. 25, no. 8, pp. 883-892, 2011.

[11] N. K. Akafuah, S. Poozesh, A. Salaimeh, G. Patrick, K. Lawler, and K. Saito, “Evolution of the Automotive Body Coating Process—A Review,” Coatings, vol. 6, no. 2, p. 24, 2016.

[12] G. Nishino, H. Sugimoto, and E. Nakanishi, “Preparation and properties of acrylic melamine hard coating,” Journal of Applied Chemistry, vol. 123, no. 1, pp. 307-315, 2012.

[13] B. Likozar, I. Poliansek, R. C. Korosec, and P. Ogorelec, “Curing kinetics study of melamine–urea–formaldehyde resin,” Journal of Thermal Analysis and Calorimetry, vol. 109, no. 3, pp. 1-10, 2011.




DOI: https://doi.org/10.34238/tnu-jst.4783

Refbacks

  • There are currently no refbacks.
TNU Journal of Science and Technology
Rooms 408, 409 - Administration Building - Thai Nguyen University
Tan Thinh Ward - Thai Nguyen City
Phone: (+84) 208 3840 288 - E-mail: jst@tnu.edu.vn
Based on Open Journal Systems
©2018 All Rights Reserved