ADSORPTION OF METHYL ORANGE IN WATER BY COMPOSITE CHITOSAN - MAGNETITE: ISOTHERM, KINETIC, AND THERMODYNAMIC STUDIES

Bùi Minh Quý

doi:10.34238/tnu-jst.5702

ADSORPTION OF METHYL ORANGE IN WATER BY COMPOSITE CHITOSAN - MAGNETITE: ISOTHERM, KINETIC, AND THERMODYNAMIC STUDIES

About this article

Received: 17/03/22 Revised: 23/05/22 Published: 25/05/22

Authors

Bui Minh Quy , TNU - University of Sciences

Abstract

The adsorption of methyl orange (MO) into the water by a chitosan-magnetite (CM) composite was investigated in the article. The adsorption process was investigated by parameters, such as pH, contact time, temperature and initial concentration of MO. Langmuir and Freundlich isotherm adsorption models were used to analyze the experimental data. The kinetic adsorption was studied using pseudo-first-order, pseudo-second-order, Elovich, and intra-molecular-diffusion models. The pseudo-second-order and Langmuir models fitted the adsorption of MO onto CM. The maximum adsorption capacity calculated using the Langmuir model decreased from 188.88 to 162.99 mg/g when the temperature increased from 293 to 313K. The adsorption of MO onto CM was an exothermic and spontaneous process. The adsorption was created electrostatic attraction between CM and MO. Because of the material's magnetism, CM could easily recover. After three times of reuse, CM had a quite high adsorption efficiency.

Keywords

Adsorption; Methylene Orange; Chitosan; Magnetite, Fe3O4; Adsorption Isotherm; Adsorption Kinetic

Full Text:

PDF (Tiếng Việt)

References

[1] W. Chen, J. Mo, X. Du, Z. Zhang, and W. Zhang, “Biomimetic dynamic membrane for aquatic dye removal,” Water Res., vol. 151, pp. 243-251, 2019.

[2] B. Amit, S. D. Sivanesan, and C. Tapan, “Azo dyes: past, present and the future,” Environ. Rev., vol. 19, pp. 350-370, 2011.

[3] S. Mohebbi et al., “Chitosan in Biomedical Engineering: A Critical Review,” Curr. Stem Cell Res. Ther., vol. 14, no. 2, pp. 93-116, 2019.

[4] Z. Shariatinia, “Pharmaceutical applications of chitosan,” Adv. Colloid Interface Sci., vol. 263, pp. 131-194, 2019.

[5] A. Ali and S. Ahmed, “A review on chitosan and its nanocomposites in drug delivery,” Int. J. Biol. Macromol., vol. 109, pp. 273-286, 2018.

[6] F. Ham-Pichavant, G. Sèbe, P. Pardon, and V. Coma, “Fat resistance properties of chitosan-based paper packaging for food applications,” Carbohydr. Polym., vol. 61, no. 3, pp. 259-265, 2005.

[7] L. Zhang, Y. Zeng, and Z. Cheng, “Removal of heavy metal ions using chitosan and modified chitosan: A review,” J. Mol. Liq., vol. 214, pp. 175-191, 2016.

[8] A. Szyguła, E. Guibal, M. Ruiz, and A. M. Sastre, “The removal of sulphonated azo-dyes by coagulation with chitosan,” Colloids Surfaces A Physicochem. Eng. Asp., vol. 330, no. 2-3, pp. 219-226, 2008.

[9] M. A. Zulfikar, S. Afrita, D. Wahyuningrum, and M. Ledyastuti, “Preparation of Fe₃O₄-chitosan hybrid nano-particles used for humic acid adsorption,” Environ. Nanotechnology, Monit. Manag., vol. 6, pp. 64-75, 2016.

[10] H. Rasoulzadeh et al., “Parametric modelling of Pb(II) adsorption onto chitosan-coated Fe₃O₄ particles through RSM and DE hybrid evolutionary optimization framework,” J. Mol. Liq., vol. 297, p. 111893, 2020.

[11] M. Q. Bui, T. O. Do, D. V. Nguyen, T. N. L. Nguyen, T. H. H. Nguyen, and Q. T. Vu, “Studying adsorption of methylene blue onto chitosan – magnetite composite,” Vietnam J. Catal. Adsorpt., vol. 11, no. 1, pp. 59-64, 2021.

[12] Q. T. Vu, M. Q. Bui, and T. D. Hoang, “Synthesis composite chitosan-magnetite apply to adsorption antibiotic in aqueous,” Vietnam J. Catal. Adsorpt, vol. 10, no. 1S, pp. 121-126, 2021.

[13] M. Jamali and A. Akbari, “Facile fabrication of magnetic chitosan hydrogel beads and modified by interfacial polymerization method and study of adsorption of cationic/anionic dyes from aqueous solution,” J. Environ. Chem. Eng., vol. 9, no. 3, p. 105175, 2021.

[14] A. I. A. Sherlala, A. A. A. Raman, M. M. Bello, and A. Buthiyappan, “Adsorption of arsenic using chitosan magnetic graphene oxide nanocomposite,” Journal of Environmental Management, vol. 246. pp. 547-556, 2019.

[15] A. A. A. Darwish, M. Rashad, and H. A. AL-Aoh, “Methyl orange adsorption comparison on nanoparticles: Isotherm, kinetics, and thermodynamic studies,” Dye. Pigment., vol. 160, pp. 563-571, 2019.

[16] N. Mohammadi, H. Khani, V. K. Gupta, E. Amereh, and S. Agarwal, “Adsorption process of methyl orange dye onto mesoporous carbon material–kinetic and thermodynamic studies,” J. Colloid Interface Sci., vol. 362, no. 2, pp. 457-462, 2011.

[17] B. Tanhaei, A. Ayati, M. Lahtinen, and M. Sillanpää, “Preparation and characterization of a novel chitosan/Al2O3/magnetite nanoparticles composite adsorbent for kinetic, thermodynamic and isotherm studies of Methyl Orange adsorption,” Chem. Eng. J., vol. 259, pp. 1-10, 2015.

[18] S. Radoor, J. Karayil, J. Parameswaranpillai, and S. Siengchin, “Adsorption Study of Anionic Dye, Eriochrome Black T from Aqueous Medium Using Polyvinyl Alcohol/Starch/ZSM-5 Zeolite Membrane,” J. Polym. Environ., vol. 28, no. 10, pp. 2631-2643, 2020.

[19] H. N. Tran, S. J. You, and H. P. Chao, “Thermodynamic parameters of cadmium adsorption onto orange peel calculated from various methods: A comparison study,” J. Environ. Chem. Eng., vol. 4, no. 3, pp. 2671–2682, 2016.

[20] Z. Liu, A. Zhou, G. Wang, and X. Zhao, “Adsorption Behavior of Methyl Orange onto Modified Ultrafine Coal Powder,” Chinese J. Chem. Eng., vol. 17, no. 6, pp. 942–948, 2009.

[21] D. Chen, J. Chen, X. Luan, H. Ji, and Z. Xia, “Characterization of anion-cationic surfactants modified montmorillonite and its application for the removal of methyl orange,” Chem. Eng. J., vol. 171, no. 3, pp. 1150-1158, 2011.

[22] S. Rattanapan, J. Srikram, and P. Kongsune, “Adsorption of Methyl Orange on Coffee grounds Activated Carbon,” in Energy Procedia, vol. 138, pp. 949-954, 2017.

[23] I. Khurana, A. K. Shaw, Bharti, J. M. Khurana, and P. K. Rai, “Batch and dynamic adsorption of Eriochrome Black T from water on magnetic graphene oxide: Experimental and theoretical studies,” J. Environ. Chem. Eng., vol. 6, no. 1, pp. 468-477, 2018.

[24] H. Al-Zoubi et al., “Comparative Adsorption of Anionic Dyes (Eriochrome Black T and Congo Red) onto Jojoba Residues: Isotherm, Kinetics and Thermodynamic Studies,” Arab. J. Sci. Eng., vol. 45, no. 9, pp. 7275-7287, 2020.

DOI: https://doi.org/10.34238/tnu-jst.5702

Refbacks

There are currently no refbacks.



Remember me