SLIDING MODE POWER TRACKING CONTROL BASED ON HYPERBOLIC TANGENT FUNCTION OF DOUBLY FED INDUCTION GENERATOR

Phạm Thanh Tùng; Trần Thị Thùy Trang; Nguyễn Việt Trung

doi:10.34238/tnu-jst.6198

SLIDING MODE POWER TRACKING CONTROL BASED ON HYPERBOLIC TANGENT FUNCTION OF DOUBLY FED INDUCTION GENERATOR

About this article

Received: 20/06/22 Revised: 29/07/22 Published: 01/08/22

Authors

1. Pham Thanh Tung , Vinh Long University of Technology Education
2. Tran Thi Thuy Trang, Vinh Long University of Technology Education
3. Nguyen Viet Trung, Vinh Long University of Technology Education

Abstract

This article designs a sliding mode controller based on hyperbolic tangent function (SMC-tanh) to power direct control for a doubly fed induction generator (DFIG). The DFIG is an electrical asynchronous three-phase machine with open rotor windings which can be fed by external voltages and widely used in high power fields. The proposed controller was designed to ensure that the actual powers of the DFIG follow the desired powers in a finite time. The hyperbolic function was used to reduce the chattering phenomenon around the sliding surface. The stability of the system was proven by Lyapunov's theory. Simulation results in MATLAB/Simulink showed the effectiveness of the proposed controller without the overshoot, the steady-state converges to 0, the rising time, the settling time of the active and reactive power was 0.002(s), 0.0031(s) and 0.002(s), 0.0036(s), respectively.

Keywords

Sliding mode control; Hyperbolic tangent function; Chattering; Power; Doubly fed induction generator

Full Text:

PDF (Tiếng Việt)

References

[1] L. Djilali, E. N. Sanchez, and M. Belkheiri, “First and High Order Sliding Mode Control of a DFIG-Based Wind Turbine,” Electric Power Components and Systems, vol. 48, no. 1–2, pp. 105–116, 2020.

[2] B. Kelkoul and A. Boumediene, “Stability analysis and study between classical sliding mode control (SMC) and super twisting algorithm (STA) for doubly fed induction generator (DFIG) under wind turbine,” Energy, vol. 214, no. 11, pp. 1-32, 2021.

[3] H. Chojaa, A. Derouich, S. E. Chehaidia, O. Zamzoum, M. Taoussi, and H. Elouatouat, “Integral sliding mode control for DFIG based WECS with MPPT based on artificial neural network under a real wind profile,” Energy Reports, vol. 7, no. 2021, pp. 4809–4824, 2021.

[4] Y. Sahri, S. Tamalouzt, F. Hamoudi, S. L. Belaid, M. Bajaj, M. M. Alharthi, M. S. Alzaidi, and S. S. M. Ghoneim, “New intelligent direct power control of DFIG-based wind conversion system by using machine learning under variations of all operating and compensation modes,” Energy Reports, vol. 7, pp. 6394–6412, 2021.

[5] D. Cherifi and Y. Miloud, “Hybrid Control Using Adaptive Fuzzy Sliding Mode Control of Doubly Fed Induction Generator for Wind Energy Conversion System,” Period. Polytech. Elec. Eng. Comp. Sci., vol. 64, no. 4, pp. 374–381, 2020.

[6] Y. Djeriri, “Direct power control based artificial neural networks of doubly fed induction generator for wind energy conversion system application,” Journal of Advanced Research in Science and Technology, vol. 5, no. 1, pp. 592–603, 2018.

[7] I. Yaichi, A. Semmah, P. Wira, and Y. Djeriri, “Super-twisting Sliding Mode Control of a Doubly-fed Induction Generator Based on the SVM Strategy,” Period. Polytech. Elec. Eng. Comp. Sci., vol. 63, no. 3, pp. 178–190, 2019.

[8] O. Zamzoum, Y. El, M. Errouha, A. Derouich, and A. El, “Active and Reactive Power Control of Wind Turbine based on Doubly Fed Induction Generator using Adaptive Sliding Mode Approach,” ijacsa, vol. 10, no. 2, pp. 397–406, 2019.

[9] E. O. Zouggar, S. Chaouch, D. O. Abdeslam, and A. L. Abdelhamid, “Sliding Control with Fuzzy Type-2 Controller of Wind Energy System Based on Doubly Fed Induction Generator,” I2M, vol. 18, no. 2, pp. 137–146, 2019.

[10] M. M. Alhato, S. Bouallègue, and H. Rezk, “Modeling and Performance Improvement of Direct Power Control of Doubly-Fed Induction Generator Based Wind Turbine through Second-Order Sliding Mode Control Approach,” Mathematics, vol. 8, no. 11, pp. 1–31, 2020.

[11] L. Pan, Z. Zhu, Y. Xiong, and J. Shao, “Integral Sliding Mode Control for Maximum Power Point Tracking in DFIG Based Floating Offshore Wind Turbine and Power to Gas,” Processes, vol. 9, no. 6, pp. 1–23, 2021.

[12] B. Kelkoul and A. Boumediene, “Stability analysis and study between classical sliding mode control (SMC) and super twisting algorithm (STA) for doubly fed induction generator (DFIG) under wind turbine,” Energy, vol. 214, no. 11, pp. 1–31, 2021.

[13] J. Liu, Sliding Mode Control Using MATLAB. Elsevier Science, 2017.

[14] D. Zhu, W. Zhang, C. Liu, and J. Duan, “Fractional-Order Hyperbolic Tangent Sliding Mode Control for Chaotic Oscillation in Power System,” Mathematical Problems in Engineering, vol. 2021, no. 3, pp. 1–10, 2021.

[15] Y. Ding, C. Liu, S. Lu, and Z. Zhu, “Hyperbolic Sliding Mode Trajectory Tracking Control of Mobile Robot,” Proceedings of the 2018 3rd International Conference on Electrical, Automation and Mechanical Engineering (EAME 2018), Xi’an, China, vol. 127, pp. 234–238, 2018.

[16] I. Mukherjee and S. Routroy, “Comparing the performance of neural networks developed by using Levenberg-Marquardt and Quasi-Newton with the gradient descent algorithm for modelling a multiple response grinding process,” Expert Syst. Appl, vol. 39, no. 3, pp. 2397–2407, 2012.

DOI: https://doi.org/10.34238/tnu-jst.6198

Refbacks

There are currently no refbacks.



Remember me