DESIGN CONNECTION DEVICE AND CONTROLING SYSTEM  IN THE TRAINING SET FOR HYDRAULICS WS200 USING PLC

Đỗ Huy Điệp; Nguyễn Hoàng Quân

doi:10.34238/tnu-jst.6190

DESIGN CONNECTION DEVICE AND CONTROLING SYSTEM IN THE TRAINING SET FOR HYDRAULICS WS200 USING PLC

About this article

Received: 17/06/22 Revised: 19/08/22 Published: 19/08/22

Authors

1. Do Huy Diep, University of Engineering and Technology - Vietnam National University, Hanoi
2. Nguyen Hoang Quan , University of Engineering and Technology - Vietnam National University, Hanoi

Abstract

Automation in the industrial manufacturing plays a very important role in today's technology era. Therefore, the understanding of automatic control into the hydraulic system to contribute to the automation of the production process is one of the knowledge that needs to be taught to students. Currently, the University of Technology (VNU) is equipped with a training system WS 200 to the purpose of training and teaching for students. The control system of the experimental set WS200 in using is hydraulic and electrical control that provides basic knowledge of control but lacks automatic control in manufacturing industry. The article presents a research on PLC S7 - 1200, design and manufacture a device to connect programmable controller (PLC) with training system WS200 to control hydraulic devices automatically. The researchers built algorithms, and programed problems in the training set using PLC control valve for hydraulic system. As a result, the connection device and control from computer for hydraulic system WS200 was successfully implemented.

Keywords

Hydraulic system; Automation studio; PLC S7 - 1200; WS200; HMI

Full Text:

PDF (Tiếng Việt)

References

[1] A. Jadhav and M. Patil, “PLC Based Industrial Automation System,” in International Conference on Recent Trends in Engineering and Management Science (RTEM 2014), Nagpur, 2014, pp.19-23.

[2] R. Pawar and N. R. Bhasme, “Application of PLC’s for Automation of Processes in Industries,” Int. Journal of Engineering Research and Applications, vol. 6, no. 6, (Part - 3), pp. 53-59, June 2016.

[3] M. S. Babu and P. V. R. L. Narasimham, “Implementation of T-Junction Traffic Light Control SystemUsing Simatic S7-200 PLC,” Int. Journal of Engineering Research and Applications, vol. 6, no. 3, (Part - 2), pp. 73-77, March 2016.

[4] D. Debnath, “PLC Controlled Automatic CoolingSystem of Water-Cooled Compressor,” International Journal of Computer Science and Mobile Computing, vol. 7, no. 4, pp. 01-11, April- 2018.

[5] R. Mandal, S. K. Chaulya, G. M. Prasad, and R. P. Verma, “Automation Of Underground Coal Mines Using Plc,” Journal of Mines, Metals & Fuels, Special Issue on Mentca, pp. 174-181, 2015.

[6] Y. N. Burali, “PLC Based Industrial Crane Automation & Monitoring,” International Journal of Engineering and Science, vol. 1, no. 3, pp. 01-04, Sept. 2012.

[7] OptiProERP company, “5 Benefits of Automation in the Manufacturing Sector,” [Online]. Available: https://www.optiproerp.com/blog/5-benefits-of-automation-in-the-manufacturing-sector/. [Accessed June 10, 2022].

[8] Lucas-Nuelle company, “HPC Continuous Valve Technology - Proportional Hydraulics,” [Online]. Available: https://www.lucas-nuelle.us/2768/apg/11103/HPC-Continuous-Valve-Technology-Proportional-Hydraulics.htm. [Accessed June 10, 2022].

[9] H. T. Bui, Pneumatic and hydraulic control system, Education Publishing House, (in Vietnamese), 2003.

[10] Siemens, S7 – 1200 Programmable controller System Manual, Siemens AG, 2009, pp. 1-225.

[11] Siemens company, “SIMATIC STEP 7 Basic/Professional V15.1 and SIMATIC WinCC V15.1,” 2018. [Online]. Available: https://support.industry.siemens.com/cs/document/109755202/simatic-step-7-basic-professional-v15-1-and-simatic-wincc-v15-1?dti=0&lc=en-AO. [Accessed June 10, 2022].

DOI: https://doi.org/10.34238/tnu-jst.6190

Refbacks

There are currently no refbacks.



Remember me