DESIGN AND MANUFACTURE A DEVICE OF ELECTROMAGNETIC INDUCTION EQUIPMENT FOR TEACHING PHYSICS EXPERIMENTS

Dương Thanh Tùng

doi:10.34238/tnu-jst.12341

DESIGN AND MANUFACTURE A DEVICE OF ELECTROMAGNETIC INDUCTION EQUIPMENT FOR TEACHING PHYSICS EXPERIMENTS

About this article

Received: 19/03/25 Revised: 30/06/25 Published: 30/06/25

Authors

Duong Thanh Tung , Hanoi University of Industry

Abstract

In this study, the author designed and fabricated an experimental apparatus to investigate the phenomenon of electromagnetic induction based on the principle of determining the induced electromotive force resulting from a varying magnetic flux in a closed circuit. A coil with specified area and number of turns was placed within the magnetic field of a rotating magnet. As the rotational speed of the magnet was varied, an induced electromotive force was generated in the coil. Using the constructed apparatus, the power generation effect of the coil was evaluated by placing it in the magnetic field of the rotating magnet. Experimental results obtained from a coil with 350 turns and a diameter of 51.9 mm showed that an induced electromotive force appeared in the circuit as the angular velocity ω of the magnet changed. Notably, when ω ≈ 2300 rpm, the light bulb connected to the circuit began to emit light. Furthermore, the relationship between the induced electromotive force and the rotational speed of the magnet was found to be nearly linear, with a correlation coefficient as high as R² = 0.9988. The results obtained from this custom-designed experimental apparatus demonstrate its potential applicability in physics laboratory instruction at educational institutions.

Keywords

Physics experiment; Electromagnetic induction; Electromotive force; Rotation speed; Induced Current

Full Text:

PDF (Tiếng Việt)

References

[1] G. Yang, H. Gu, J. Yin, C. Fei, Z. Shi, X. Shi, X. Ying, and J. Huang, “Reductive cation for scalable wide-bandgap perovskite solar cells in ambient air,” Nat. Sustain., vol. 5, pp. 529–535, 2025, doi: 10.1038/s41893-025-01529-5.

[2] Z. Zeng, Y. Meng, Z. Yang, Y. Ye, Q. Lin, Z. Meng, H. Hong, S. Ye, Z. Cheng, Q. Lan, J. Wang, Y. Chen, H. Zhang, Y. Bai, X. Jiang, B. Liu, J. Hong, T. Guo, F. Li, Y. Chen, and Z. Weng, “ Efficient CsPbBr ₃ Perovskite Light-Emitting Diodes via Novel Multi-Step Ligand Exchange Strategy Based on Zwitterionic Molecules,” ACS Appl. Mater. Interfaces, vol. 16, pp. 10389–10397, 2024, doi: 10.1021/acsami.3c17324.

[3] T. Duong, P. Tran, T. Van, D. Nguyen, and V. Tran, “A Dense, Pinholes-free Pure Cubic Phase CsPbBr₃ Nanocrystals Film for High-performance Photodetector,” Electron. Mater. Lett,. vol. 20, no. 2, pp. 217-223, 2023, doi: 10.1007/s13391-023-00448-x.

[4] H. M. Cho and H. W. Jang, “Inorganic Halide Perovskite Quantum Dots for Memristors,” Electron. Mater. Lett., vol. 21, pp. 291–310, 2025, doi: 10.1007/s13391-025-00560-0.

[5] X. Zhang, R. Bai, Y. Fu, Y. Hao, X. Peng, J. Wang, B. Ge, J. Liu, Y. Hu, X. Ouyang, W. Jie, and Y. Xu, “High energy resolution CsPbBr₃ alpha particle detector with a full-customized readout application specific integrated circuit,” Nat. Commun., vol. 15, 2024, Art. no. 6333, doi: 10.1038/s41467-024-50746-7.

[6] H. Sun, J. Zhang, X. Gan, L. Yu, H. Yuan, M. Shang, C. Lu, D. Hou, Z. Hu, Y. Zhu, and L. Han, “Pb-Reduced CsPb0.9Zn0.1I2Br thin Films for efficient Perovskite Solar cells,” Adv. Energy Mater., vol. 9, 2019, Art. no. 1900896, doi:10.1002/aenm.201900896

[7] Z. Yang, J. Yao, L. Xu, W. Fan, and J. Song, “Designer bright and fast CsPbBr₃ perovskite nanocrystal scintillators for high-speed X-ray imaging,” Nat. Commun., vol. 15, 2024, Art. no. 8870, doi: 10.1038/s41467-024-53263-9.

[8] T. Nguyen, T. Luu, D. Nguyen, and T. Duong, “Comparative study on Backlighting Unit using CsPbBr₃ Nanocrystals/KSFM phosphor + blue LED and commercial WLED in Liquid Crystal Display,” J. Electron Mater., vol. 50, no. 4, pp. 1827–1834, 2021, doi:10.1007/s11664-021-08775-1.

[9] J. Miao and F. Zhang, “Recent progress on highly sensitive perovskite photodetectors,” J. Mater. Chem. C., vol. 7, pp. 1741–1791, 2019, doi:10.1039/C8TC06089D.

[10] C. Kang, I. Dursun, G. Liu, L. Sinatra, X. Sun, M. Kong, J. Pan, P. Maitry, E. Ooi, et al., “High-speed colour-converting photodetector with all-inorganic CsPbBr₃ perovskite nanocrystals for ultraviolet light communication,” Light: Science & Applications, vol. 8, 2019, Art. no. 94, doi: 10.1038/s41377-019-0204-4.

[11] J. Duan, D. Dou, Y. Zhao, Y. Wang, X. Yang, H. Yuan, B. He, and Q. Tang, “Spray-assisted deposition of CsPbBr3 films in ambient air for large-area inorganic perovskite solar cells,” Mater. Today Energy, vol. 10, pp. 146–152, 2018, doi:10.1016/j.mtener.2018.09.001

[12] J. Li, R. Gao, F. Gao, J. Lei, H. Wang, X. Wu, J. Li, H. Liu, X. Hua, and S. Liu, “fabrication of efficient CsPbBr₃ perovskite solar cells by single-source thermal evaporation,” J. Alloys Compd., vol. 818, 2020, Art. no. 152903, doi: 10.1016/j.jallcom.2019.152903.

[13] H. M. Ghaithan, Z. A. Alahmed, S. M. H. Qaid, M. Hezam, and A. S. Aldwayyan, “Density Functional Study of Cubic, Tetragonal, and Orthorhombic CsPbBr3 Perovskite,” ACS Omega, vol. 5, pp.7468–7480, 2020, doi: 10.1021/acsomega.0c00197.

[14] K. Ho, M. Wei, E. Sargent, and G. Walker, “Grain Transformation and Degradation mechanism of formamidinium and cesium lead Iodide Perovskite under Humidity and Light,” ACS Energy Lett., vol.6, no. 3, pp. 934–940, 2021, doi: 10.1021/acsenergylett.0c02247.

[15] X. Pham, B. Tran, D. Nguyen, T. Nguyen, M. Nguyen, C. Nguyen, and T. Duong, “Low-Dimensional CsPbBr₃@CoBr₂ Super-Nanowire Structure for Perovskite/PMMA Composite with Highly Blue Emissive Performance,” Crystals, vol. 11, 2021, Art. no. 1564, doi: 10.3390/cryst11121564.

[16] Q. Wang, W. Wu, R. Wu, S. Yang, Y. Wang, J. Wang, Z. Chai, and Q. Han, “Improved thermal stability of photoluminescence in Cs₄PbBr₆ microcrystals/CsPbBr₃ nanocrystals,” J. Colloid Interface Sci., vol. 554, pp.133–141, 2019, doi: 10.1016/j.jcis.2019.06.083.

[17] X. Zhao, T. Tang, Q. Xie, L. Gao, L. Lu, and Y. Tang, “First-principles study on the electronic and optical properties of the orthorhombic CsPbBr₃ and CsPbI₃ with Cmcm space group,” New J. Chem., vol. 45, pp.15857–15862, 2021, doi: 10.1039/D1NJ02216D.

[18] L. Protesescu, S. Yakunin, M. I. Bodnarchuk, F. Krieg, R. Caputo, C. H. Hendon, R. X. Yang, A. Walsh, and M. V. Kovalenko, “Nanocrystals of Cesium Lead Halide Perovskites (CsPbX₃ , X = Cl, Br, and I): Novel Optoelectronic Materials Showing Bright Emission with Wide Color Gamut,” Nano Lett., vol. 15, pp. 3692–3696, 2015, doi: 10.1021/nl5048779.

DOI: https://doi.org/10.34238/tnu-jst.12341

Refbacks

There are currently no refbacks.



Remember me