APPLICATION OF SIW TECHNOLOGY  IN X-BAND BANDPASS FILTERS DESIGN

Phạm Việt Anh; Hoàng Minh Thiện; Nguyễn Hoàng Nguyên; Trần Việt Hùng; Nguyễn Văn Bắc

doi:10.34238/tnu-jst.7141

APPLICATION OF SIW TECHNOLOGY IN X-BAND BANDPASS FILTERS DESIGN

About this article

Received: 19/12/22 Revised: 14/02/23 Published: 14/02/23

Authors

1. Pham Viet Anh , Le Quy Don Technical University
2. Hoang Minh Thien, Le Quy Don Technical University
3. Nguyen Hoang Nguyen, Le Quy Don Technical University
4. Tran Viet Hung, Le Quy Don Technical University
5. Nguyen Van Bac, Le Quy Don Technical University

Abstract

At present, there are many technologies used to design RF bandpass filters such as rectangular waveguide, cavity resonant, microstrip technologies, etc. In this paper, we present the design of an X-band pass filter using SIW (Substrate Integrated Waveguide) technology. The filter is designed on a Roger 5880 substrate with a microstrip line - SIW converter, increasing on-board integration, reducing cost and equipment complexity. Using HFSS software to simulate the filter parameters: the central working frequency is 9.2 GHz, the bandwidth is 400 MHz, the attenuation factor is low -1.16 dB, the reflection coefficient is less than -20 dB. The simulation results in the paper are also compared and evaluated with the results published in recent years. The filter is designed, with the size of 18x76 mm², to be suitable for use in the receiver/transmitter modules of radar systems, communications, etc., working in the X band.

Keywords

SIW; Filter; Bandpass; Microstrip; X-Band

Full Text:

PDF (Tiếng Việt)

References

[1] J.-S. Hong and M. J. Lancaster, Microstrip filters for RF/microwave applications. New York: Wiley, 2001.

[2] X.-P. Chen and K. Wu, “Substrate Integrated Waveguide Filter: Basic Design Rules and Fundamental Structure Features,” IEEE Microw. Mag., vol. 15, no. 5, pp. 108–116, 2014.

[3] A. Rhbanou, S. Bri, and M. Sabbane, “Analysis of Substrate Integrated Waveguide (SIW) Resonator and Design of Miniaturized SIW Bandpass Filter,” Int. J. Electron. Telecommun., vol. 63, no. 3, pp. 255–260, 2017.

[4] T. T. H. Tran, X. Q. Nguyen, and V. Y. Vu, “Modeling and Design of a Vacuum Resonator Filter for LTE-A Transceiver with Two Cross Couplings,” The University of Da Nang - Journal of Science and Technology, vol. 4, no. 11(120), pp. 27-31, 2017.

[5] R. Lahiri and R. Sadhu, “Design of Miniaturized X-Band Microstrip Hairpin Band Pass Filter,” International Symposium on Microwaves-2016 Conference (ISM-16), 2016, p. 5.

[6] L. Xia, J. Xie, and G. Hua, “Design of a Novel Structure SIW Filter,” 2012 IEEE MTT-S International Microwave Workshop Series on Millimeter Wave Wireless Technology and Applications, 2012, p. 4.

[7] X.-P. Chen and K. Wu, “Substrate Integrated Waveguide Filters: Design Techniques and Structure Innovations,” IEEE Microw. Mag., vol. 15, no. 6, pp. 121–133, 2014.

[8] S. Hu, Y. Hu, H. Zheng, W. Zhu, Y. Gao, and X. Zhang, “A Compact 3.3–3.5 GHz Filter Based on Modified Composite Right-/Left-Handed Resonator Units,” Electronics, vol. 9, no. 1, p. 1, 2019.

[9] I. Badaoui, N. A. Touhami, M. Boussouiss, M. Lamsalli, and M. Moubadir, “Design of substrate integrated waveguide fifth order band pass filter,” Procedia Manuf., vol. 22, pp. 514–518, 2018.

[10] A. O. Nwajana, A. Dainkeh, and K. S. K. Yeo, “Substrate Integrated Waveguide (SIW) Bandpass Filter with Novel Microstrip-CPW-SIW Input Coupling,” J. Microw. Optoelectron. Electromagn. Appl., vol. 16, no. 2, pp. 393–402, 2017.

[11] K. Radhika and S. S. Rajan, “Design and Analysis of Substrate Integrated Waveguide Wideband Filter for X-Band Frequency Applications,” International Journal of Advanced Research in Biology Engineering Science and Technology (IJARBEST), vol. 2, no. 14, pp. 119-127, 2016.

[12] A. Rhbanou, S. Bri, and M. Sabbane, “Design of Substrate Integerated Waveguide Bandpass Filter Based on Metamaterials CSRRs,” Electr. Electron. Eng., vol. 4, no. 4, pp. 63-72, 2014.

[13] A. Rhbanou, M. Sabbane, and S. Bri, “Design of substrate integrated waveguide cavity bandpass filters,” in 2016 5th International Conference on Multimedia Computing and Systems (ICMCS), 2016, pp. 410–415.

[14] K. Guvenli, S. Yenikaya, and M. Secmen, “Design and Implementation of Substrate Integrated Waveguide Filter to Work on X-Band and Ku-Band,” in 2018 9th International Conference on Ultrawideband and Ultrashort Impulse Signals (UWBUSIS), 2018, pp. 198–200.

[15] P. Zhang and M. Li, “Cascaded trisection substrate‐integrated waveguide filter with high selectivity,” Electron. Lett., vol. 50, no. 23, pp. 1717–1719, 2014.

[16] F. T. Ladani, S. Jam, and R. Safian, “A novel X-band bandpass filter using substrate integrated waveguide resonators,” in 2010 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE), 2010, pp. 1-5.

[17] Z.-C. Hao, W. Hong, J.-X. Chen, X.-P. Chen, and K. Wu, “Compact super-wide bandpass substrate integrated waveguide (SIW) filters,” IEEE Trans. Microw. Theory Tech., vol. 53, no. 9, pp. 2968–2977, 2005.

[18] B. S. Kim, J. W. Lee, K. S. Kim, and M. S. Song, “PCB substrate integrated waveguide-filter using via fences at millimeter-wave,” in 2004 IEEE MTT-S International Microwave Symposium Digest (IEEE Cat. No.04CH37535), vol. 2, pp. 1095–1098, 2004.

DOI: https://doi.org/10.34238/tnu-jst.7141

Refbacks

There are currently no refbacks.



Remember me