ON THE FIXED POINT OF FREQUENCY RESPONSE OF SINGLE DEGREE-OF-FREEDOM BASE EXCITED ISOLATION WITH PIEZOELECTRIC ENERGY HARVESTING

Phan Thị Trà My; Lã Đức Việt; Nguyễn Tuấn Ngọc

doi:10.34238/tnu-jst.8901

ON THE FIXED POINT OF FREQUENCY RESPONSE OF SINGLE DEGREE-OF-FREEDOM BASE EXCITED ISOLATION WITH PIEZOELECTRIC ENERGY HARVESTING

About this article

Received: 04/10/23 Revised: 03/11/23 Published: 03/11/23

Authors

1. Phan Thi Tra My, Institute of Mechanics - Vietnam Academy of Science and Technology
2. La Duc Viet , Institute of Mechanics - Vietnam Academy of Science and Technology
3. Nguyen Tuan Ngoc, Graduate University of Science and Technology - Vietnam Academy of Science and Technology

Abstract

Vibration isolation is a fundamental device to protect machines or vehicles from unwanted vibration. Adding the energy harvesting capability to the vibration isolation can extract the waste heat energy. This paper considers the single-degree-of-freedom (SDOF) base excited isolation with piezoelectric energy harvesting. The purpose of this paper is to find how the energy harvesting circuit affects the fixed point of the frequency response. The fixed point is an important point in design the vibration isolation. The analytical frequency response method is used. The motion equation is written in the dimensionless form. The frequency response analysis of the system reveals the fixed point in the frequency response plot. The position of the fixed point does not depend on the circuit resistance. Two parameters of the piezoelectric harvesting circuit including the dimensionless resistance and the dimensionless force factor can be changed in isolation design. The design strategy is to make the fixed point and the peak point coinciding. Based on the strategy, the optimal condition of the isolation is expressed by a relation between the dimensionless resistance and the dimensionless force factor.

Keywords

Vibration isolation; Energy harvesting; Fixed point; Frequency response; Dimensionless analysis

Full Text:

PDF

References

[1] Q. Cai and S. Zhu, “The nexus between vibration-based energy harvesting and structural vibration control: A comprehensive review,” Renew. Sustain. Energy Rev., vol. 155, 2022, Art. no. 111920.

[2] H. Xiao, X. Wang, and S. John, “A dimensionless analysis of a 2DOF piezoelectric vibration energy harvester,” Mech. Syst. Signal Process, vol. 58-59, pp. 355-375, 2015.

[3] H. Xiao, X. Wang, and S. John, “A multi degree of freedom piezoelectric vibration energy harvester with piezoelectric elements inserted between two nearby oscillators,” Mech. Syst. Signal Process, vol. 68-69, pp. 138-154, February 2016.

[4] H. Xiao and X. Wang, “A review of piezoelectric vibration energy harvesting techniques,” Int. Rev. Mech. Eng., vol. 8, no. 3, pp. 609-620, 2014.

[5] X. Wang and L. W. “Lin Dimensionless optimization of piezoelectric vibration energy harvesters with different interface circuits,” Smart Mater Struct. vol. 22, pp. 1-20, 2013.

[6] X. Wang and H. Xiao, “Dimensionless analysis and optimization of piezoelectric vibration energy harvester,” Int. Rev. Mech. Eng., vol. 7, no. 4, pp. 607-624, 2013.

[7] S. S. Rao, Mechanical vibrations, Pearson Education, Harlow, UK, 2018.

[8] J. Ormondroyd and J. P. D. Hartog, “The theory of the dynamic vibration absorber,” Transactions of ASME, vol. 50, pp. 9-22, 1928.

[9] A. Preumont, Vibration Control of Active Structures, Springer-Verlag Berlin Heidelberg, 2011.

DOI: https://doi.org/10.34238/tnu-jst.8901

Refbacks

There are currently no refbacks.



Remember me