• Home
• About
• Register
• Search
• Current
• Archives
• Online First
• Announcements
• For Authors

Home > Archives > Vol 176, No 16 (2017)

Table of Contents

NATURAL SCIENCE – ENGINEERING – TECHNOLOGY

Cover - Table of content Van phong Tap chi

PDF (Tiếng Việt) 1-2

DESIGN AND MANUFACTURE OF A RE - GRINDING MACHINE FOR WORKING SURFACE HOLES OF RING DIES WITH DIAMETOR OF 750mm ÷ 1000mm Le Quang Duy, Phan Van Nghi, Nguyen Thai Binh, Cao Thanh Long

PDF (Tiếng Việt) 3-9

CALCULATING TOLERANCE OF THE ACTUATORING CHAIN OF THE LATCH LOCK OF THE SAFE BY NUMERICAL METHOD Pham Thanh Long, Le Thi Thu Thuy

PDF (Tiếng Việt) 11-17

EFFECT OF TECHNOLOGICAL ON PHYSICO-MECHENICAL PROPERTIES OF Cu-TiC COMPOSITE Vu Lai Hoang, Dang Quoc Khanh

PDF (Tiếng Việt) 19-23

DESIGN AND MANUFACTURE OF A PRESSED - PACKAGING MACHINE WITH CAPACITY OF 01 TON/H FOR CORN STALKS AFTER CUTTING AND MIXING Phan Van Nghi, Nguyen Thai Binh, Le Quan Duy, Cao Thanh Long

PDF (Tiếng Việt) 25-30

EVALUATION OF SLIDING FRICTION REDUCTION BETWEEN HIGH SPEED STEEL AND ALUMINUM IN PRESENCE OF ULTRASONIC VIBRATION Chu Ngoc Hung, Ngo Quoc Huy, Nguyen Van Du

PDF (Tiếng Việt) 31-36

INTRODUCING THE BURGERS MODEL AND THE EXPERIMENTAL RESEARCH ON THE EFFECTS OF AGING ON VISCOELASTIC BEHAVIOR OF HIGH-DENSITY POLYETHYLENE Tran Ngoc Giang

PDF (Tiếng Việt) 37-42

RESEARCH, DEVELOPMENT AN ENVIRONMENT-FRIENDLY COATING METHOD ON INSULATING SUBSTRATES Ly Viet Anh

PDF (Tiếng Việt) 43-48

DESIGN, MANUFACTURE A MIXER MACHINE WITH CAPACITY OF 01 TON/H FOR CORN STALKS AFTER CUTTING Nguyen Thai Binh, Phan Van Nghi, Le Quang Duy, Cao Thanh Long

PDF (Tiếng Việt) 49-54

FABRICATION OF THE Fe-Cu-Al ALLOY BY MECHANICAL ALLOYING Ho Ky Thanh, Nguyen Dang Thuy

PDF (Tiếng Việt) 55-59

KINEMATIC ADJUSTMENT OF GEAR HOBBING MACHINES AND COMPUTER APPLICATION IN COMPUTATION AND ADJUSTMENT TO IMPROVE MACHINING ACCURACY Duong Cong Dinh

PDF (Tiếng Việt) 61-64

A STUDY ON CREATING STABILITY LOBE DIAGRAM BASED ON TOOL TIP DYNAMICS Tran Minh Quang, Chun Hui Chung

PDF 65-70

DESIGN ROPE CLIMBING ROBOT USING FOUR BAR MECHANISM Dang Anh Tuan, Duong Pham Tuong Minh

PDF (Tiếng Việt) 71-75

OVERVIEW OF SOLUTIONS WITH HIGH-CAPACITY RECHARGEABLE BATTERY TO ENERGY SAVING Nguyen Minh Cuong, Kieu Thi Khanh, Dang Danh Hoang, Nguyen Duc Tuong

PDF (Tiếng Việt) 77-80

OPTIMIZING THE STRUCTURE AND MANAGING THE OPERATION OF ELECTRIC SYSTEM IN BUILDING USING HYBIRD POWER GENERATION G-PVA Ngo Duc Minh, Do Trung Hai

PDF (Tiếng Việt) 81-87

CONTROL DESIGN FOR AXIAL FLUX PERMANENT MAGNET SYNCHRONOUS MOTOR WHICH OPERATES ABOVE THE NOMINAL SPEED Duong Quoc Tuan, Nguyen Nhu Hien, Tran Xuan Minh

PDF (Tiếng Việt) 89-95

EVALUATING INFLUENCE OF STOCHASTIC LOADS TO POWER LOSS OF DISTRIBUTION SYSTEM Vu Van Thang, Bach Quoc Khanh

PDF (Tiếng Việt) 97-102

DECOUPLING CONTROL FOR DISTILLATION COLUMN SYSTEMS Nguyen Thi Thanh Nga, Dang Hai Hung, Tran Ngoc anh, Bui Thanh Huyen

PDF (Tiếng Việt) 103-107

OPTIMAL DESIGN PARAMETERS OF DYNAMIC VIBRATION ABSORBERS TO REDUCE DIESEL ENGINE VIBRATION BY TAGUCHI METHOD Vu Duc Phuc, Nguyen Van Quyen, Nguyen Ngoc Ha

PDF (Tiếng Việt) 109-115

COUPLED FIXED POINT OF MAPPING IN THE CONE METRIC SPACE Vu Hong Quan

PDF (Tiếng Việt) 117-120

SYNTHESIS ZnAl2O4 NANOSIZED BY OXALYL DIHYDZAZIDE COMBUSTION METHOD AND CATALYTIC PROPERTIES IN METHYLENE BLUE DECOMPOSITION REACTION Nguyen Thi Thuy Hang, Luong Thi Lan

PDF (Tiếng Việt) 121-126

AN ALGORITHM TO APPROXIMATE DOUBLE INTEGRALS BY USING ADAPTIVE QUADRATURE METHOD Dinh Van Tiep

PDF 127-133

INNOVATIVE TEACHING METHOD AT FACULTY OF TECHNICAL EDUCATION, THAI NGUYEN UNIVERSITY OF TECHNOLOGY Le Thi Quynh Trang

PDF (Tiếng Việt) 135-141

EFFECTIVENESS ASSESSMENT TREATMENT OF BIOSOLIDS WASTE AND MUSHROOM WASTE BY THE SPECIES PERIONYX EXCAVATUS Nguyen Thi Thu Phuong, Sharon Melissa Pineda Castillo

PDF 143-147

RESEARCH WATER TREATMENT ABILITY OF OUTDOOR AQUARIUM BY CONSTRUCTED WETLANDS Vi Thi Mai Huong

PDF Untitled 149-153

RESEARCHING ON TREATING WASTEWATER FROM PRODUCTION OF CANNA VERMICELLI BY ACTIVATED SLUDGE TECHNOLOGY Pham Huong Quynh

PDF 155-160

THE EFFECT OF CARBONIZATION TEMPERATURE ON QUALITY OF ACTIVATED CARBON PRODUCED FROM CORNCOBS Hoang Le Phuong

PDF 161-166

DISK TOOL PROFILING FOR HELICAL SURFACES GENERATION USING BOOLEAN OPERATION METHOD Nguyen Thanh Tu

PDF 167-171

ANALYSIS AND DETERMINE OPTIMAL DIMENSIONS FOR HYDRAULIC 1X SCISSOR LIFT Bui Thanh Hien, Dang Anh Tuan

PDF (Tiếng Việt) 173-177

DESCRIPTION OF PID-SENSORIZED CONTROLLERS FOR SMALL CONDITIONS AND APPLICATIONS FOR GEARING TRANSMISSION SYSTEMS Le Thi Thu Ha

PDF (Tiếng Việt) 179-184

ANSYS SOFTWARE APPLICATION MODEL CONSTRUCTION PHASE THREE TRANSFORMERS AND ANALYSIS OF WORKING REGIME IN TRANSFORMERS NORMAL WORKING CONDITIONS AND FAULT Dao Duy Yen

PDF (Tiếng Việt) 185-189

SOME MODEL ORDER REDUCTION METHODS FOR UNSTABLE SYSTEM BASED ON BALANCED TRUNCATION ALGORITHM Vu Ngoc Kien

PDF (Tiếng Việt) 191-197

COMPENSATING THE TOTAL DISTURBANCE FOR MECHANICAL AND ELECTRICAL SYSTEMS USING THE LEARNING FEEDFORWARD CONTROL METHOD Dam Bao Loc, Nguyen Duy Cuong

PDF (Tiếng Việt) 199-203

A NEW STUDY ON TEMPERATURE MEASUREMENT SYSTEM IN SURFACE GRINDING Luu Anh Tung, Vu Ngoc Pi, Banh Tien Long

PDF (Tiếng Việt) 205-209